After install MetaStock 10 in Windows XP SP2, I can´t run the software. Message: UNABLE TO INSTALL WINDOWS SERVICE.

I need any help.

Thanks.

---

__
Denilson B. Coelho
Brasília/DF - Brazil

Check if the AST Service is installed and automatically running.

This service is provided by the Astsrv.exe file which shall be installed in your \windows\system 32 directory.

To check if AST service is running, go to Control Panel, Admin Tools, Services.

Check if there is a AST Service line in the right panel and if it is automatically initialized.

 

 

 

I have same problem on my computer but my operating system is Vista

I have Astsrv.exe in c:\windows\system32 directory

but I can't find AST service in right pane

Thanks in advance for your help

Are you using version 10.1 for the Vista installation?  10.0 is not compatible with Vista and will have quite a few permission issues such as this.

Hello,

I have also been having lots of ASTLOG????.TXT files in C drive of my computer since I installed MS Pro eSignal version 10.1.

I noticed that one new file is created everytime MetaStock is started.

Can somebody please guide about the purpose of these file. Just too many files have built up in the C drive.

Regards

SMG

Hello SMG,

This issue should be getting resolved in the next build of MetaStock 10.1, but I do not have a release date at this time.  You can manually delete all the ASTLOG###.TXT, only the ASTLOG.TXT is non-deletable.

I apologize for the inconvenience caused by this.

Thanks, Mr. Pyradius,

SMG

Greetings!

I installed MetaStock 10.1 for the first time last night. Since it was late, I did not get much accomplished with the exception of the installation of the software as well as the data disk. I also installed the Big Trends Toolkit.

The next morning, I had a message that my disk space was low (this was installed on a laptop.) Much to my surprise, I had a a few ASTLOGxxx.tct files, one being as large as 26 GIG!

Looking at one of them, a sample of the data is:
        1294718 AstService: ReportStatusToSCMgr SERVICE_START_PENDING
        1294734 AstService Read/Write request mailslot created
        1294734 AstService Service conrol mailslot created
        1294734 AstSevice building initial Blessed Process Table (BPT)
        1294734 AstSevice initial Blessed Process Table RegCreateKeyEx failed with 0
        1294734 AstService: ReportStatusToSCMgr SERVICE_RUNNING
        1294734 AstService now running
        1294734 AstService Entering ProcessReqMessage for process 4392
        1294734 AstService entering DispatchMessage        1294734 AstService Geometry Request
        1294734 AstService entering OpenDisk for disk=-1
        1294734 AstService processing OpenDisk for disk=0
        1294734 AstService OpenDisk for disk=0 exiting with status 0
        1294734 AstService CloseDisk        1294734 AstService CloseDisk returning 0
        1294734 AstService Geometry Request returning status 0
        1294734 AstSevice SendResponse to process 4392
        1294734 AstSevice SendResponse to process 4392 exiting with status 0
        1294734 AstService Exiting ProcessReqMessage for process 4392 with status=0
        1294734 AstService Entering ProcessReqMessage for process 4392
        1294734 AstService entering DispatchMessage        1294734 AstService Read Request
        1294734 AstService TestKey        1294734 AstService TestKey returning 0
        1294734 AstService entering OpenDisk for disk=-1
        1294734 AstService processing OpenDisk for disk=0
        1294734 AstService OpenDisk for disk=0 exiting with status 0
        1294734 AstService entering ReadDiskSector for pos=30720
        1294750 AstService ReadDiskSector for pos=30720 returning 0
        1294750 AstService CloseDisk        1294750 AstService CloseDisk returning 0
        1294750 AstService Read Request returning status 0
        1294750 AstSevice SendResponse to process 4392
        1294750 AstSevice SendResponse to process 4392 exiting with status 0
        1294750 AstService Exiting ProcessReqMessage for process 4392 with status=0
        1294750 AstService Entering ProcessReqMessage for process 4392
        1294750 AstService entering DispatchMessage        1294750 AstService DiskId Request
        1294750 AstService entering GetDiskId for disk=-1
        1294750 AstService processing GetDiskId for disk=0
        1294750 AstService GetDiskId exiting with 0
        1294750 AstService DiskId Request returning status 0
        1294750 AstSevice SendResponse to process 4392
        1294750 AstSevice SendResponse to process 4392 exiting with status 0
        1294750 AstService Exiting ProcessReqMessage for process 4392 with status=0
        1294750 AstService Entering ProcessReqMessage for process 4392
        1294750 AstService entering DispatchMessage        1294750 AstService DiskId Request
        1294750 AstService entering GetDiskId for disk=-1
        1294750 AstService processing GetDiskId for disk=0
        1294750 AstService GetDiskId exiting with 0
        1294750 AstService DiskId Request returning status 0
        1294750 AstSevice SendResponse to process 4392
        1294750 AstSevice SendResponse to process 4392 exiting with status 0
        1294750 AstService Exiting ProcessReqMessage for process 4392 with status=0
        1294750 AstService Entering ProcessReqMessage for process 4392
        1294750 AstService entering DispatchMessage        1294750 AstService Geometry Request

I deleted all the files as the prior posts indicated, however, when I launch MetaStock, they come back. I will continue to delete these, but I am concerned about the size of these files.

Was this released with some debugging logs enabled? Is there no way to turn them off?

Thanks for your assistance with this.

 

Paul.

Hi Nickless, your solution doens't work for me.

I have the same "Unable to install Windows Service" problem. I am using XP Sp2.
The Astsrv.exe is exists in my \windows\system 32 directory but still it cannot be run.

Under admin tools,services, the astsrv.exe is  already under automatic run config but still it cannot run. Trying to start it, the error says "error 3 : the system cannot find the path specified" 

Trying to run it by clicking Astsrv.exe file in  \windows\system 32 directory also didn't work.

Any patch coming to retify this?

 

 

If you double click on the AST Service listing in the Services section of Windows, what does it have listed for the "Path to executable"?

for me, its blanks (nothing under "path to executable"). Maybe thay why it cannot find the patch specified.

We did develop a small application the remove the service.  We're not sure what causes the path not to be set when the service gets installed, but typically after removing the service and then launching MetaStock the service gets reinstalled correctly.  I will email the file to you with instructions on running the application.

Thank you. That should be great, will see if it works.

hello, I´m getting the same error, I already tried reinstalling and removing the service astcc (using cmd sc delete astcc, then reboot) but still no good

I´m using a 10.0 install

Pyradius:

We did develop a small application the remove the service.  We're not sure what causes the path not to be set when the service gets installed, but typically after removing the service and then launching MetaStock the service gets reinstalled correctly.  I will email the file to you with instructions on running the application.

Any development on this?

 

My first suggestion would be to make sure you have the latest version of MetaStock (10.1c) available from our web site.

This should resolve most cases.  There will always be exceptions I am sure, and we will have to look at these on a case-by-case basis.  Some other possible causes:

-Inadequate permissions on the Windows account

-Not installing on a supported operating system (i.e. trying to install on Windows ME)

-Dependancy services (Such as the Windows Event Log service) are not running

-Path to the executable is not set correctly